1) The working pressure does not exceed the larger pressure indicated by the filter;
2) The filter should generally be installed after the aftercooler and the gas tank, as close as possible to the point of use and lower temperature.
3) The filter should not be installed behind the quick-opening valve to prevent backflow and impact.
4) The filter should be installed vertically with enough space below to replace the filter element.
5) The larger filter should be properly supported in the pipeline.
27 What are the precautions for replacing the filter element?
1) Isolate the filter, close the inlet valve or compressed air supply system, and then close the outlet valve after fully depressurizing (or close the outlet valve and drain through the filter to fully depressurize).
2) Unscrew the shell and remove the old filter element.
3) Clean the filter housing.
4) Replace with a new filter element (don't miss the sealing ring, and add petroleum jelly, the filter element should be installed tightly).
What failures will be encountered when replacing the filter element equipment?
The filter element equipment needs to be replaced when it is in use. Only in this way can the filter element equipment exert its effect. Then, what failures will be encountered when replacing the filter element equipment?
There are many types of filter element equipment. For the use of automobile filter elements, the adjustment and maintenance of the car are related to the performance of the engine and the driving resistance of the car. If the maintenance of the used car is not good, the fuel consumption of the engine will increase by 10%~ 20%.
There are many reasons for the increase in fuel consumption. For example, the air filter element is not replaced in time, so the air intake is not smooth. Simply put, the fresh air entering the engine cylinder is reduced, but the amount of fuel injected will not be reduced. The oil cannot be fully burned, which leads to insufficient engine power and increases fuel consumption. Therefore, regular replacement of the oil filter element is important. Therefore, the replacement of the filter element equipment is very important, so as to ensure its working effect.
