The main purpose of the filter is to filter impurities, and it is also an indispensable device in the pipeline transportation of media. Among the filters we can access, there are no more than filters for water purification in life, and fish farming filters that are well-known to fish enthusiasts.
And so on. But do you know what you should pay attention to during the use of the filter? Today, the editor summarizes two points about the points that need to be paid attention to during the use of the filter. Next, please follow the steps of the editor and study it together. !
One point: The voltage and frequency are as required, and the regular maintenance should be kept in mind, and the troubleshooting should be called an "expert".
The so-called voltage and frequency means that equipment such as fish tank filters should be used in accordance with the specified voltage and frequency during use. Do not use high-voltage power supplies for operation. And regular maintenance, I believe fish lovers know this
One point, if the filter is not cleaned for a long time, it is likely to have a bad effect on the filter! During use, if the filter fails, even if you are familiar with the repair method or cut off the power
Do not repair it yourself, because if the repair is not done properly, it is likely to cause a lot of unnecessary trouble for the professional repairer in the subsequent filter repair process.
Two points: remember to check the equipment before use, the temperature environment during the use of the equipment should be moderate, and the relevant parts should be unplugged after the equipment is used.
For example, before using the stainless steel filter, remember to check whether the accessories and sealing ring are complete and whether they are damaged, and then install it as required. The purpose of this is also a very important consideration for the safety of the subsequent use process. in
During the use of the filter, the filter element of the general filter can be resistant to high temperature, just like the filter element produced by our company is generally 25 °C-50 °C, which is suitable for the environment. For long-term operation, the temperature should be controlled at
Below 60°C, the disinfection temperature is below 125°C for 20 minutes, and if the operating temperature is 70°C-100°C, then at this time, you can test the PTFE filter element produced by our company. After the equipment is used, try to light the filtrate.
The downtime should not be too long, and in general, it is not recommended to open the machine. Do not unplug the filter element. If the downtime is long or the filtrate should not be stored overnight, it should be noted that during the shutdown process-be sure to clean the filter element and the filter (also The backflush method can be used, and the specific method can refer to the backflush method on our company homepage for operation).
