Replacement For Schroeder Filter Element 18LZ25

After the construction machinery is used for a period of time, the hydraulic oil often contains particulate impurities, which will cause the wear of the relative moving surface of the hydraulic components, the blockage of the slide valve, and the clogging of the throttle orifice, which greatly reduces the reliability of the system. Installing a certain precision oil filter in the system is a necessary means to ensure the normal operation of the hydraulic system. In addition to high filtration accuracy, precision instruments generally require both inlet and return oil to be filtered, so that both the oil suction and return pressures are high. Because Jining crane valves and hydraulic parts have strong anti-pollution capabilities, only return oil filters are used. . The general oil return filter is a line-gap oil filter. Steel wire or aluminum wire is tightly wound on the outside of the cylindrical frame to form a filter element, and the small gap between the copper wires is used to filter out the impurities mixed in the liquid. Its structure is simple, the flow capacity is large, and the filtering accuracy is higher than that of the mesh type oil filter, but it is not easy to clean, and it is mostly a return oil filter. The low-pressure oil filter on the oil return path of the system can filter out the pollutants before the oil flows into the oil tank, and provide clean oil for the hydraulic pump.

The replacement filter model is as follows

TFX-100x100	TRFX-300X10	IX-630x80
TFX-160x100	TRFX-100X20	ISV20-40x80
TFX-250x100	TRFX-200X20	ISV25-63x80
TFX-400x100	TRFX-300X20	ISV32-80x80
TFX-630x100	TRFX-100X30	ISV40-160x80
TFX-800x100	TRFX-200X30	ISV50-250x80
TFX-1000x100	TRFX-300X30	ISV65-400x80