Gas turbine lubricating oil station filter element, filter material: stainless steel mesh, small pressure difference, fast flow rate, and large dirt holding capacity.


When injecting grease, it is necessary to observe the problem that the nominal diameter of the pneumatic valve is flush with the seal ring seat. For example, for gate valves, if there is an open position interference, the open position limiter should be adjusted inward to make sure that the nominal diameter is vertical and locked. Adjusting the emergency stop switch should not only consider opening or closing unilateral parts, but should be considered as a whole.
| DRLF-A6500x3 | ZU-H800x5FP | GU-H10x40P |
| DRLF-A7800x3 | ZU-H10x20P | GU-H25x40P |
| DRLF-A9100x3 | ZU-H25x20P | GU-H40x40P |
| DRLF-A1300x5 | ZU-H40x20P | GU-H63x40P |
| DRLF-A2600x5 | ZU-H63x20P | GU-H100x40P |
| DRLF-A3900x5 | ZU-H100x20P | GU-H160x40P |
If the opening position is level and the closing is not timely, the pneumatic valve will not close tightly. In the same way, when the adjustment is closed in time, the relative adjustment of the open position should also be considered. Ensure the oblique angle of the gate valve. After grease injection, the grease injection port must be sealed. To prevent the residue from entering, or the vulcanization of long-chain fatty acids at the grease injection port, the cover should be wiped with anti-corrosion grease to prevent corrosion. It is convenient to use when used repeatedly.
Hot Tags: power plant filter element xjl.02.09, China, suppliers, customized, quotation, for sale, Turbine Lubricating Oil Filter LYZ 5, Coal Mill Filter Element, Replacement For Oil Filter FRD WJA1 050, Oil Filter BLG 2200X20FS, Replacement For Oil Filter DFLQG 0041B T1 6L1000E1W80S1, Steam Turbine Filter Element











