Xinxiang Shunhe Filter Equipment Co., Ltd.
+86-373-5128330
Contact Us
  • Tel: +86-373-5128330

  • Fax: +86-373-5128330

  • WhatsApp:+86 15090482416

  • WeChat:15090482416

  • Email:info@cnshfilter.com

  • Email: 897505662@qq.com

  • Add: 800 meters west of the intersection of Hongli Avenue and Weiyuan Road, Muye District, Xinxiang City

How To Replace The High Pressure Gas Filter

Dec 01, 2020

The use efficiency of high-pressure gas filters is still very high, but the cost of high-pressure gas filters is higher than that of ordinary filters. Because the equipment has a certain service life, many friends don’t know how to judge the scrapping of high-pressure gas filters. I don't know how to replace the high-pressure gas filter. Let's talk briefly about the high-pressure gas filter manufacturer below.

High pressure gas filter

1. How to determine the scrapped HEPA filter

1. During the environmental test, it was found that the suspended particles in the room were obviously high. After eliminating other reasons, the diffuser of the high-efficiency air supply port was removed, and the surface of the air supply port was damaged, and there were black and gray marks. If the equipment cannot be used, a new filter should be replaced in time. If the filter is not obviously damaged, please use the air outlet of the air flow cover to measure the air supply of each air supply port, and then increase and replace the air supply.

2. If other air filters are not abnormal, if the air supply of the air outlet of the room is less than half of the standard air supply, the filter is clogged and the clogged high efficiency filter should be replaced.

Two, high efficiency filter replacement

1. Remove the diffuser plate of the waste high efficiency filter, loosen the fixed parts of the high efficiency filter, remove the high efficiency filter, check the static pressure box, the fixed parts and the panel for corrosion and loss. If rust is found, rust removal and removal are required. paint. According to the specifications and quantity, a new type of high efficiency filter is used. Check that the outer packaging of the high efficiency filter should be intact. The certificate of high efficiency filter should be complete, the frame should be strong and durable, and the filter paper should not be damaged. Clan and dry, the inner packaging should be kept intact before installation.

2. Introduce the surface speed, dust holding capacity and service life of the high efficiency filter

Surface speed and filtration speed: The ability to measure the air volume of a high-efficiency filter is usually expressed by surface speed, sometimes expressed by filtration speed. The two are the same for flat filters. The surface velocity is the velocity of the airflow through the filter part, usually expressed in meters per second. Filtration speed refers to the air flow speed through the filter material area. Due to different requirements for high efficiency filters, the area of filter material set in the filter is also different, sometimes larger than the damaged area of the filter. Therefore, the filtration speed is less than the surface speed and is usually expressed in seconds per minute or centimeters per second. The size of the filter is directly related to the performance of the filter. Too high filtration speed will reduce purification efficiency and increase resistance. Therefore, in order to reduce resistance, the filtration speed of the high efficiency filter is usually small, and the area of the filter material is larger.

Dust holding capacity and service life: For high-efficiency air filters, the dust holding capacity is more meaningful than general industrial dust collectors, because when the dust collector reaches the rated dust holding capacity, it often adheres to the dust collector filter through dust removal The dust on the material falls into the ash hopper, the resistance drops, and it returns to the original state. But for the air filter, it is different. After the filter reaches the full dust holding capacity, it needs to be removed and cleaned, and sometimes the filter material is replaced.

. Therefore, the size of the dust holding capacity also determines the life of the filter.

In summary, the greater the dust holding capacity of the high-pressure gas filter, the longer the service life of the high-efficiency gas filter. The amount of dust holding capacity is also related to the high-efficiency air filter material. The gradient structure is the ideal material structure, that is, from a loose to a dense structure. This structure can not only obtain a larger dust holding capacity, but also Have higher work efficiency.