PI3130SMX10 Replacement For MAHLE Filter
Replacement For High pressure filter HC8900FKS16H
High pressure filter FX-190x10H
Duplex Filter XW-630x40
Coal mill lubricating oil system Filter LXKF-125A*30F
Replacement For Mpfiltri Filter STR140-6SG2M60
Lube oil filter 2-5685-1004-99
Oil motive filter HY-10-001-HTCC
Hydraulic system filter QF9702W100H3.0C
EH oil suction filter OF3-08-3RV-10
| FX-510x100 | JX-25x180 | UX-630x80 |
| FX-515x100 | JX-40x180 | UX-800x80 |
| FX-520x100 | JX-63x180 | WF-3Ax80 |
| FX-510x180 | JX-100x180 | WF-4Ax80 |
| FX-515x180 | JX-160x180 | WF-4Bx80 |
High pressure filter PQX-150x10Q2
Separate filter element 21FC1514-150x710/14
Replacement For ARGO Filter V3.0617-08
FH1087Q020BA16-M
Main engine EH oil filter LJ.00.03
Return Oil Filter DR1A401EA01V/-F
After the filter element is disassembled, it can be reused after inspection according to the following method. Remove the filter element and visually check whether the surface is damaged. If not, check and clean as follows. Place the filter element obliquely at a 45-degree angle to the plumb line, and use a small amount of clean water to flow down the surface of the filter element. If water does not infiltrate the surface of the filter element and can flow down freely, it can be reinstalled and used; otherwise, place it in an ultrasonic cleaning tank for cleaning. Use after being qualified; clean water can be used as cleaning fluid
