FRD.WJA1.009 Lube oil filter FRD.WJA1.009
Blower Duplex Filter Element G-143x790A20
SS-C30P100 replacement for Coalescing filter
Coalescing filter SG-P10P13N
AP3E302-01D10V/-W Oil motive filter
SFAX-800x3 Return Oil Filter SFAX-800x3
Hydraulic system filter 707FM1641GA20DN50H1.5F

STZX2-400x5 Hydraulic Return Oil Filter STZX2-400x5
AD3E301-04D03V/-W Power plant oil return filter
| 852034DRG10 | PI9111DRGVST10 | PI75010DN |
| 852034DRG100 | PI9115DRGVST10 | PI75016DN |
| 852034DRG25 | PI9130DRGVST10 | PI75025DN |
| 852034DRG60 | PI9145DRGVST10 | PI75040DN |
Coalescing filter SG-C50P16N
R928022476 Thin Oil Station High Pressure Filter Element
Power Plant Return Filter Element TFX-100x80
Replace Power Plant Air Filter 39903281
Replace Air Compressor Oil And Gas Separation Filter 54509427
Replacement For EH oil filter HC2206FKP6Z
W.38.C.0008 EH oil filter W.38.C.0008
The lubrication system of the thin oil station is equipped with a filter to ensure the filtration of impurities. However, due to the limited filtering area and management issues, the oil is still very easy to become dirty, black or even infiltrate and emulsify. Moreover, the filter element equipped on the thin oil station can only intercept impurities and cannot purify the water in the oil. Therefore, once the moisture or mechanical impurity content in the oil exceeds the standard, the same will happen in the thin oil station. The fluidity of the oil slows down and the viscosity of the oil increases, making it difficult. Once the friction between the unit and equipment increases and heats up, it will also cause heat up and other fatal effects on the unit. As a result, the filtering and purification of lubricating oil in thin oil stations cannot be ignored.






