Gas turbine suction filter K151.73.41.39.02
Oil pump outlet filter element W.38.Z.000203
YP15C48AGF02V Power plant special filter
turbine suction filter 0508.1411T1201.AW007
Power plant special filter YP16A86JGF02V
Fine filter L3.1100B-001
YP16A86JGF03V Power plant special filter
Gas turbine suction filter C9209014
Gas turbine cellulose filter FRT111
Gas turbine suction filter DL006001
Oil motive filter HY-10-005
Fine filter HQ25.300.17Z
Fine filter w.38.z.000194
Fine filter YP15C48AGF02N
Oil motive filter 0508.1161T0101.AW010
EH oil system filter YP07H36CGF03V
Gas turbine suction filter AD3E301-02D03V/-W
EH oil pump suction filter 0508.1258T1201.AW015
EH oil system filter HQ25.02Z-1
Hydraulic Return Oil Filter MSF-04S-01
HY-10-007 Hydraulic Return Oil Filter
Oil motive filter HQ25.03Z
When the filter element is blocked by contaminants or the system liquid temperature is too low, flow pulsation and other factors cause the inlet oil pressure to be 0.35MPa, the signalling device will issue a signal indication. The filter element should be replaced in time or the oil temperature should be increased. In this case, if the machine cannot be stopped immediately to deal with these faults, the bypass valve located at the lower part of the filter element will automatically open (the opening pressure of the bypass valve is 0.4MPa) to protect the filter and the hydraulic system from working normally.
The design adopts direct return to filter oil, which makes it very convenient to replace the filter element or refuel the fuel tank
