Main engine EH oil system filter W.38.C0134
Replace HYDAC Return Filter HC2286FCT12H50YT
Hydraulic Return Oil Filter HY1-3-001-F
Hydraulic Return Oil Filter XJL.02.09
Gas Turbine Filter Element HY1-1-001-F
LCX660-F35H Hydraulic System Line Filter Element
Gas Turbine Filter Element ZCL-1-450B
SFT-08-150W Replace Taisei Kogyo Suction Filter
Gas Turbine Filter Element HY1-3-001
Replacement For Parker Filter Element 937777Q
| PI13016RN | PI2105SM3 | 891025SMXVST16FPM |
| PI13025DN | PI2105SMX3 | 891025SMXVST16NBR |
| PI13025RN | PI21063DN | 891025SMXVST3FPM |
| PI13040DN | PI21063RN | 891026SM10NBR |
| PI13040RN | PI2108SM3 | 891026SM25NBR |
Power Plant EH Oil Station Filter HY-10-007-F
High Pressure Line Filter Element LCX1000-F35H
Gas Turbine Filter Element QF9732W25HPTC-DQ
Oil tank return filter element YZ.1310A-002
Medium Speed Coal Mill Filter Element XFL-190x10H
Set up filter element pollution indicator and oil circuit bypass valve to improve the reliability of hydraulic system:
When the filter element is blocked by contaminants or the system liquid temperature is too low, flow pulsation and other factors cause the inlet oil pressure to be 0.35MPa, the signalling device will issue a signal indication. The filter element should be replaced in time or the oil temperature should be increased. In this case, if the machine cannot be stopped immediately to deal with these faults, the bypass valve located at the lower part of the filter element will automatically open (the opening pressure of the bypass valve is 0.4MPa) to protect the filter and the hydraulic system from working normally.






