Cement Plant Suction Oil Filter WU-160x180-J

The suction filter used in the lubricating oil station has large flow and low pressure.

40MPa and below pressure grade dry oil lubrication system and supporting various specifications of thin oil station, electric lubrication pump, electric refueling pump distributor, refueling pump; XYZ, XHZ standard thin oil lubrication system and various non-standard thin oil lubrication systems And hydraulic systems; design and manufacture of oil and gas and emulsion lubrication systems; more than 50 varieties and 1000 specifications, such as tubular coolers, filters, and pipeline connectors. Products are widely used in metallurgy, mining, heavy machinery, electric power, chemicals, building materials, petroleum, ports, docks, papermaking, ship locks, environmental protection and other industries

The reason why the oil can't be sucked is that there is air in the pump body or gas accumulation in the oil inlet pipe, or the bottom valve is not closed tightly. Remedy: First press the oil up, then fill the pump body with oil, and then start the machine. At the same time, check whether the check valve is tight and whether there is air leakage in the pipelines and joints. If air leakage is found, apply lubricating oil or mixed paint to the joints after disassembly, and tighten the screws. Check the oil seal ring of the oil filling pump shaft of the thin oil station. If it is worn seriously, replace it with a new one. Oil or gas leakage in the pipeline. The nut may not be tightened tightly during installation. If the leakage is not serious, apply sludge or sludge mixed with bitumen oil on the air or oil leak.

Hot Tags: cement plant suction oil filter wu-160x180-j, China, suppliers, customized, quotation, for sale, Replacement Filter Element For Jiangsu South Lubrication NDQ 150, Replacement For Huali Hydraulic Lubrication Filter Element, Replacement For South Lubrication Filter Element, Cement Plant Filter Element, Replacement For SICHUAN CRUN Filter Element