Replace Ingersoll Rand Oil Filter 39911631

Replace Ingersoll Rand oil filter 39911631, used in power plant screw air compressor oil station oil pump high pressure filter. Filter out impurities in the oil, filter material: glass fiber filter material inside and outside galvanized mesh, deep dirt holding, high filtration efficiency

During the leak detection process of the high-efficiency filter, the tightness of the clean area should be ensured, and then the connection between the filter material and the filter pipe should be tested. The dust particle counter mainly uses the principle of light scattering to count the suspension in the clean area. The number of particles. When performing leak detection of high efficiency filter, there are certain requirements for the detection environment. The temperature must be controlled at 18-26 degrees Celsius, the relative humidity must be controlled at 45%-65%, the test personnel should be within two people, and the static pressure difference between the clean area and the outside cannot be exceeded. Larger, less than 10pa is better. The operation steps are as follows:

The dust particle counter is wiped and disinfected with alcohol first, then irradiated with ultraviolet light for 30 minutes, and then placed in a clean room.

During the leak detection process of the high-efficiency filter, keep the dust particle counter horizontally and insert the measuring port into the filter nozzle.

Turn on the power, after setting the relevant parameters, pull out the measurement port and place it in the designated position

Hot Tags: replace ingersoll rand oil filter 39911631, China, suppliers, customized, quotation, for sale, Oil Filters, Duplex Filter, Suction Filter, Suction Line Filter, DPL Mesh Filter, SPL Mesh Filter