Wind power fuel tank pall filter element DC-3, used in the inlet filter of the oil tank of the fan and oil station to filter out dust, impurities and moisture in the air, with high filtration efficiency

When running for the first time, follow the steps below:
Check whether the filter is in normal working condition: check whether the connections of the filter are firm.
| QTL-6021A | SPX-08*25 | SFBX-800*30 |
| JCAJ002 | SPX-10*10 | 0240D003BN3HC |
| HQ25.09Z | SPX-10*25 | QU-H160*30S |
| HQ25.10Z | SPAX-10*10 | TZX2.BH-40*10 |
| HQ25.10Z-1 | QYLX-63*3Q2 | LQ418.3C |
Check that the electric control box of the filter should be dry. When the power is turned on, the normal working indicator light is on. At this time, it indicates that the electric control part of the filter is in normal working condition, and the equipment can be put into trial operation.
Note: When plugging in the power, you should keep your hands dry. At the same time, keep the electric controller partly dry during the working process of the filter, and no water can enter the inside of the electric controller.
Hot Tags: wind power fuel tank pall filter element dc-3, China, suppliers, customized, quotation, for sale











