Replace EATON High Pressure Filter 01.E900.10VG.30.E.P

Replace the power plant hydraulic system EATON high-pressure filter element 01.E900.10VG.30.E.P, used in the high-pressure pipeline system of the oil tank of the hydraulic oil station, to filter out impurities in the oil, deep pollution, and high filtration efficiency.

The installation status of the filter bag, whether there is any bag drop, loose mouth, abrasion, etc. after use, can be judged by visual inspection of the emission of the chimney after it is put into operation

To prevent condensation during use, prevent the gas from cooling below the dew point in the bag chamber, especially when using the dawn filter element under negative pressure. Because the shell often has air leaking in, the air temperature in the bag room is lower than the dew point, and the filter bag will be damp. As a result, the dust is not loosely attached to the filter bag, but sticky, blocking the fabric holes and causing cleaning. The ash failure causes the pressure drop of the dust collector to be too large and cannot continue to operate, and some paste bags can not be dusted. To prevent condensation, the temperature of the gas in the dust collector and its system must be kept higher than its dew point 25～35℃ (for example, the dew point temperature of the kiln-grinding integrated machine is 58℃, and the operating temperature should be above 90℃). Ensure the good use effect of the filter bag.

Hot Tags: replace eaton high pressure filter 01.e900.10vg.30.e.p, China, suppliers, customized, quotation, for sale