0330RS075W/HC Replacement For HYDAC Oil Suction Filter Element

Replacement for HYDAC filter element 0330RS075W/HC, used for the oil suction filter before the pump of the lubricating oil system of the injection molding machine, to filter out the impurity particles in the oil, filter material: 304 stainless steel mesh + aluminum joint, small pressure difference, fast flow rate, High filtration efficiency

When installing, pay attention to make the outlet direction of the automatic sewage valve be horizontal or downward, so as to ensure the complete sewage discharge.

If manual cleaning is required, the control system should be turned to manual control.

When debugging, the rotation direction of the motor should be consistent with the marked direction.

Replace other filter element models as follows:

If the cleaning system is repeatedly cleaned and the pressure difference still cannot be reduced to the set value, it should be stopped immediately for maintenance.

Before each maintenance and cleaning, the filter should be isolated from the pressurized system. After cleaning, use a new gasket when reinstalling.

Use the selector switch to enter the automatic state, first filter, the filter time timer starts timing, and the differential pressure switch also compares the actual differential pressure with the set differential pressure. Also open the drain valve for cleaning and draining

Hot Tags: 0330rs075w/hc replacement for hydac oil suction filter element, China, suppliers, customized, quotation, for sale,